Configure CCM Wizard Properties

To configure the CCM wizard properties, follow this procedure.

  1. Invoke the CCM wizard as a root user (see Virtual Appliance Process > Cloud-Specific Setup Details for a sample setup).

    CCM Wizard Path
    /usr/local/cliqr/bin/ccm_config_wizard.sh
  2. Configure the server properties.

    Write this down for future reference!

    Write down the Field details in a printed version of the Installation Approach > Your Notes section for later use.

    Wizard Menu

    Field

    Description

    Server_Info – Configure Server Info (Required)

    Mgmtserver DNS Name

    DNS (or IP address) of the CCM management server.

    If you are configuring the HA environment, enter the CCM_LB DNS (or IP) in this field.

    DB – Configure DatabaseIP or Hostname

    DNS or IP of the database.

    DB Username and Password

    The following credentials are pre-populated:

    Default username = cliqr (cannot be changed)

    Default password = cliqr (must be changed)

    Be sure to change the default password immediately after your first login. See PostgreSQL Password for additional context.

    ELK_Info –  Configure Log Collector InfoELK Host

    Specify the IP address for the Log Collector host.

    Elasticsearch PortDisplays 8881 by default.
    Kibana PortDisplays 8882 by default.
    ELK UserThe default ELK Username = logreader.
    ELK PasswordThe default ELK Password is re@d0nly (zero between d and n) (change this password after the initial login – see Download Log File for additional context).
    Host Identifier

    A Unique ID for the server – be sure to prefix the unique identifier with CCM_ for example, CCM_1
    If not set, the CloudCenter platform uses the CCM server date.

    The Host Identifier cannot contain capital letters for both CCM and CCO configurations.

    Host Identifier List

    Only applies to environments using the HA mode – provide a list of comma separated unique host identifiers for all Log Collector hosts in a HA setup = for example, CCM_1,CCM_2,myCCM.

    The Host Identifier List cannot contain capital letters for both CCM and CCO configurations.

    In an environment operating in HA mode, if you have two CCM instances with unique IDs configured as CCM_1,CCM_2 in their respective server.properties file, then this property should state CCM_1,CCM_2 in both CCM instances. Each CCM must be aware of the unique ID of the other CCM(s) when in HA mode.

    Custom Certs Menu
    Generate_CertsTo generate new certificates for CloudCenter components. See Certificate Authentication > Generate and Update the certs.zip File on the CCM for additional context.
    Update_CertsTo update certificates for CloudCenter components. See Certificate Authentication > Generate and Update the certs.zip File on the CCM for additional context.
  3. Exit the CCM configuration wizard.

  4. Select Yes, to restart the CCM server and corresponding CloudCenter services.

You have successfully installed the CCM instance! You can now proceed to the next step:

  • Configure the Log Collector details in the CCM wizard's Configure Log Collector Info menu.

  • If you are installing the Enterprise Service Bus (ESB), do so at this point.

Back to: CCM (Required)

  • No labels
© 2017-2019 Cisco Systems, Inc. All rights reserved